Rischio
Empieza gratis

DocumentaciónZapatas

Datos de entrada

Cada campo de un modelo de una zapata, como lo da el esquema del motor: qué es, su unidad y su convención, y sus límites.

Un modelo es un documento JSON, el mismo que arman los formularios del estudio, escribe su IA y envía un agente con create_model. Cada elemento tiene un id, estable y único en el modelo (los resultados nombran con él los elementos de los que depende cada chequeo), y un name, que se ve en el lienzo y en la memoria; los estratos pueden llevar además un color. Todo modelo dice su contract_version, hoy la 14. Las unidades son SI: kN, m, kPa, kN/m³ y grados.

Estos son sus campos, del propio esquema del motor: de ahí salen los formularios del estudio, y es lo que get_tool_schema le da a un agente. Los nombres de los campos y sus descripciones están en inglés, como el estudio.

footinguno de · obligatorio

circularA circular footing, such as under a tank or a tower: its load centred.

shapetexto · obligatorio · = "circular"

diameternúmero · obligatorio · ≥ 0,1

Diameter B (m). The bearing resistance and the elastic settlement take a square of the same area (AASHTO C10.6.1.3).

V = 14 000 kNDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DB = 8,00 m

embedment_depthnúmero · opcional · ≥ 0 · por defecto 0

Depth of the base below the ground surface, Df (m).

V = 14 000 kNDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DDf = 2,00 m

embedment_permanentsí o no · opcional · por defecto false

Whether the soil over the base, down to Df, stays through the structure's life: no scour, excavation or trench will take it away. AASHTO counts that soil's shear in the bearing (dq, Eq. 10.6.3.1.2a-10, at most 1.4) only where it stays and no stratum above the base is weaker than the one below it (10.6.3.1.2a); false, the default, takes dq = 1.0, as for a base whose cover may go. AASHTO's equation's: Meyerhof's general one keeps its own depth factors.

loadgrupo · obligatorio

A circle has no moments here: its load is centred.

deadgrupo · obligatorio

The permanent part: the structure's own weight and what stays on it (AASHTO's DC, components and attachments), with the footing's own weight, and the soil on it unless given as vertical_earth_pressure: all that reaches the soil at the base.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

V = 14 000 kNDrag the tail sideways to lean the load: its horizontal part HH = 0 kN

wearing_surfacesgrupo · opcional

Optional: wearing surfaces and utilities on the structure (AASHTO's DW, γp 1.50 or 0.65, Table 3.4.1-2); else they go in the dead part, at DC's factors.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

vertical_earth_pressuregrupo · opcional

Optional: the weight of the soil on the footing, as an abutment's or a retaining wall's (AASHTO's EV, γp 1.35 or 1.00, Table 3.4.1-2); else it goes in the dead part.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

horizontal_earth_pressuregrupo · opcional

Optional: the earth pressure on the structure the footing carries, its horizontal and vertical components and their moment (AASHTO's EH, γp 1.50 or 0.90 active, 1.35 or 0.90 at rest, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

pressure_statetexto · obligatorio · uno de: active, at_rest

The earth pressure the thrust was computed with: active (the wall moves away from the soil) or at rest; AASHTO factors them 1.50 and 1.35 at their maximum.

earth_surchargegrupo · opcional

Optional: what a permanent surcharge on the soil adds, on the footing or as the thrust it brings (AASHTO's ES, γp 1.50 or 0.75, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

livegrupo · opcional

Optional: the part that comes and goes (occupancy, traffic, storage; AASHTO's LL with its IM), and the weight of a live surcharge on the soil over the footing, as over an abutment's heel: a code takes it in or out, whichever governs, so it bears in the bearing and is left out where it would hold the footing against sliding or the eccentricity (AASHTO C11.5.6, Fig. C11.5.6-3). Free mode adds it to the dead part; a code with load factors factors each its own way.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

live_surchargegrupo · opcional

Optional: the thrust of a live surcharge on the soil behind the structure, traffic's (AASHTO's LS, 1.75, Table 3.4.1-1), in or out apart from the live part: its horizontal force, its moment and, where the thrust is inclined, its own vertical component, which holds the footing as the thrust's (C11.5.6: one load factor on both). The surcharge's weight on the soil over the footing isn't its thrust: it goes in the live part, which Table 3.4.1-1 factors as it factors LS.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

friction_loadgrupo · opcional

Optional: the friction a bearing or the superstructure passes to the structure (AASHTO's FR, 1.00, Table 3.4.1-1).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load (kN).

time_since_loadingnúmero · opcional · > 0

Optional: the years since the load began, at which the settlement is wanted: how far the clay's consolidation has gone (with its cv) and the sand's creep (Schmertmann's C2). Empty, the final consolidation and no creep (C2 = 1, as Leonards and Holtz advise for clean sands). The settlement check takes the final one.

methodsgrupo · opcional

Methods (advanced): each the designer's choice, with its default.

bearing_capacitytexto · opcional · uno de: meyerhof_general, aashto_nominal

The nominal bearing resistance's equation; null, the design code's: meyerhof_general in free mode, aashto_nominal under AASHTO. meyerhof_general: Meyerhof's general bearing capacity equation (1963), with De Beer's shape, Hansen's depth and Meyerhof's inclination factors, and the water table in q and in γ within B below the base (Das & Sivakugan, Eq. 6.28), the textbooks' equation, for a designer who works by it or checks against a book's example. aashto_nominal: AASHTO LRFD's Eq. 10.6.3.1.2a-1 (Munfakh et al. 2001), with Vesic's inclination factors, Cwq and Cwγ for the water, and dq at most 1.4, only where the soil above the base stays (embedment_permanent) and none of it is weaker, for a designer who follows AASHTO's own formulation. AASHTO admits either: its nominal resistance is by "accepted soil mechanics theories" (10.6.3.1.2a), with the theoretical method's resistance factor either way. A wall's base and an MSE block take AASHTO's always.

immediate_settlementtexto · opcional · uno de: elastic, schmertmann_settlement · por defecto "elastic"

The immediate settlement (AASHTO 10.6.2.4.2): the elastic one (10.6.2.4.2a), for any soil, with every stratum's elastic properties (without them, no immediate settlement is computed); or Schmertmann's (10.6.2.4.2c), the strain influence method for cohesionless soils, on each stratum's Es (taken as measured in situ, X = 1.0), with its creep by the years since loading.

rectangularA rectangular or square footing, such as under a column.

shapetexto · obligatorio · = "rectangular"

widthnúmero · obligatorio · ≥ 0,1

Width B (m), the shorter side, the one the horizontal load and moment_width act along.

V = 1450 kNDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DB = 2,20 m

lengthnúmero · obligatorio · ≥ 0,1

Length L (m), the longer side: L ≥ B.

B = 2,20 mL = 2,20 mV = 1450 kNDrag to change the width BDrag to change the width BDrag to change the length LDrag to change the length LDrag to change the width B and the length LDrag to change the width B and the length LDrag to change the width B and the length LDrag to change the width B and the length LL = 2,20 m

embedment_depthnúmero · opcional · ≥ 0 · por defecto 0

Depth of the base below the ground surface, Df (m).

V = 1450 kNDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DDf = 1,20 m

embedment_permanentsí o no · opcional · por defecto false

Whether the soil over the base, down to Df, stays through the structure's life: no scour, excavation or trench will take it away. AASHTO counts that soil's shear in the bearing (dq, Eq. 10.6.3.1.2a-10, at most 1.4) only where it stays and no stratum above the base is weaker than the one below it (10.6.3.1.2a); false, the default, takes dq = 1.0, as for a base whose cover may go. AASHTO's equation's: Meyerhof's general one keeps its own depth factors.

loadgrupo · obligatorio

The load on a rectangular footing, at the centre of its base; its moments move it off the centre.

deadgrupo · obligatorio

The permanent part: the structure's own weight and what stays on it (AASHTO's DC, components and attachments), with the footing's own weight, and the soil on it unless given as vertical_earth_pressure: all that reaches the soil at the base.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

V = 1450 kNDrag to move the load off the centre: its eccentricity and its moment, M = V eDrag the tail sideways to lean the load: its horizontal part HH = 0 kN

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

V = 1450 kNDrag to move the load off the centre: its eccentricity and its moment, M = V eDrag the tail sideways to lean the load: its horizontal part HeB = 0,00 m · MB = 0 kN·m

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

B = 2,20 mL = 2,20 mV = 1450 kNDrag to move where the load bears: its moments M_B = V e_B and M_L = V e_LeB = 0,00 m · eL = 0,00 m

wearing_surfacesgrupo · opcional

Optional: wearing surfaces and utilities on the structure (AASHTO's DW, γp 1.50 or 0.65, Table 3.4.1-2); else they go in the dead part, at DC's factors.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

vertical_earth_pressuregrupo · opcional

Optional: the weight of the soil on the footing, as an abutment's or a retaining wall's (AASHTO's EV, γp 1.35 or 1.00, Table 3.4.1-2); else it goes in the dead part.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

horizontal_earth_pressuregrupo · opcional

Optional: the earth pressure on the structure the footing carries, its horizontal and vertical components and their moment (AASHTO's EH, γp 1.50 or 0.90 active, 1.35 or 0.90 at rest, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

pressure_statetexto · obligatorio · uno de: active, at_rest

The earth pressure the thrust was computed with: active (the wall moves away from the soil) or at rest; AASHTO factors them 1.50 and 1.35 at their maximum.

earth_surchargegrupo · opcional

Optional: what a permanent surcharge on the soil adds, on the footing or as the thrust it brings (AASHTO's ES, γp 1.50 or 0.75, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

livegrupo · opcional

Optional: the part that comes and goes (occupancy, traffic, storage; AASHTO's LL with its IM), and the weight of a live surcharge on the soil over the footing, as over an abutment's heel: a code takes it in or out, whichever governs, so it bears in the bearing and is left out where it would hold the footing against sliding or the eccentricity (AASHTO C11.5.6, Fig. C11.5.6-3). Free mode adds it to the dead part; a code with load factors factors each its own way.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

live_surchargegrupo · opcional

Optional: the thrust of a live surcharge on the soil behind the structure, traffic's (AASHTO's LS, 1.75, Table 3.4.1-1), in or out apart from the live part: its horizontal force, its moment and, where the thrust is inclined, its own vertical component, which holds the footing as the thrust's (C11.5.6: one load factor on both). The surcharge's weight on the soil over the footing isn't its thrust: it goes in the live part, which Table 3.4.1-1 factors as it factors LS.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

friction_loadgrupo · opcional

Optional: the friction a bearing or the superstructure passes to the structure (AASHTO's FR, 1.00, Table 3.4.1-1).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the base of the footing (kN).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m); positive moves it towards x = B.

moment_lengthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the length (kN·m); positive moves it towards y = L.

time_since_loadingnúmero · opcional · > 0

Optional: the years since the load began, at which the settlement is wanted: how far the clay's consolidation has gone (with its cv) and the sand's creep (Schmertmann's C2). Empty, the final consolidation and no creep (C2 = 1, as Leonards and Holtz advise for clean sands). The settlement check takes the final one.

methodsgrupo · opcional

Methods (advanced): each the designer's choice, with its default.

bearing_capacitytexto · opcional · uno de: meyerhof_general, aashto_nominal

The nominal bearing resistance's equation; null, the design code's: meyerhof_general in free mode, aashto_nominal under AASHTO. meyerhof_general: Meyerhof's general bearing capacity equation (1963), with De Beer's shape, Hansen's depth and Meyerhof's inclination factors, and the water table in q and in γ within B below the base (Das & Sivakugan, Eq. 6.28), the textbooks' equation, for a designer who works by it or checks against a book's example. aashto_nominal: AASHTO LRFD's Eq. 10.6.3.1.2a-1 (Munfakh et al. 2001), with Vesic's inclination factors, Cwq and Cwγ for the water, and dq at most 1.4, only where the soil above the base stays (embedment_permanent) and none of it is weaker, for a designer who follows AASHTO's own formulation. AASHTO admits either: its nominal resistance is by "accepted soil mechanics theories" (10.6.3.1.2a), with the theoretical method's resistance factor either way. A wall's base and an MSE block take AASHTO's always.

immediate_settlementtexto · opcional · uno de: elastic, schmertmann_settlement · por defecto "elastic"

The immediate settlement (AASHTO 10.6.2.4.2): the elastic one (10.6.2.4.2a), for any soil, with every stratum's elastic properties (without them, no immediate settlement is computed); or Schmertmann's (10.6.2.4.2c), the strain influence method for cohesionless soils, on each stratum's Es (taken as measured in situ, X = 1.0), with its creep by the years since loading.

stripA long footing, such as under a wall: analysed per metre of length.

shapetexto · obligatorio · = "strip"

widthnúmero · obligatorio · ≥ 0,1

Width B (m); its loads are per metre of the footing's length.

V = 160 kN/mDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DB = 1,20 m

embedment_depthnúmero · opcional · ≥ 0 · por defecto 0

Depth of the base below the ground surface, Df (m).

V = 160 kN/mDrag to change the width BDrag to change the width BDrag to change the width B and the depth DDrag to change the width B and the depth DDrag to change the depth DDf = 0,90 m

embedment_permanentsí o no · opcional · por defecto false

Whether the soil over the base, down to Df, stays through the structure's life: no scour, excavation or trench will take it away. AASHTO counts that soil's shear in the bearing (dq, Eq. 10.6.3.1.2a-10, at most 1.4) only where it stays and no stratum above the base is weaker than the one below it (10.6.3.1.2a); false, the default, takes dq = 1.0, as for a base whose cover may go. AASHTO's equation's: Meyerhof's general one keeps its own depth factors.

loadgrupo · obligatorio

Per metre of footing: there is no length, so no moment along it.

deadgrupo · obligatorio

The permanent part: the structure's own weight and what stays on it (AASHTO's DC, components and attachments), with the footing's own weight, and the soil on it unless given as vertical_earth_pressure: all that reaches the soil at the base.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

V = 160 kN/mDrag to move the load off the centre: its eccentricity and its moment, M = V eDrag the tail sideways to lean the load: its horizontal part HH = 0 kN/m

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

V = 630 kN/mH = 127 kN/mMB = -195 kN·m/meB = 0,31 mDrag to move the load off the centre: its eccentricity and its moment, M = V eDrag the tail sideways to lean the load: its horizontal part HeB = -0,30 m · MB = -189 kN·m/m

wearing_surfacesgrupo · opcional

Optional: wearing surfaces and utilities on the structure (AASHTO's DW, γp 1.50 or 0.65, Table 3.4.1-2); else they go in the dead part, at DC's factors.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

vertical_earth_pressuregrupo · opcional

Optional: the weight of the soil on the footing, as an abutment's or a retaining wall's (AASHTO's EV, γp 1.35 or 1.00, Table 3.4.1-2); else it goes in the dead part.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

horizontal_earth_pressuregrupo · opcional

Optional: the earth pressure on the structure the footing carries, its horizontal and vertical components and their moment (AASHTO's EH, γp 1.50 or 0.90 active, 1.35 or 0.90 at rest, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

pressure_statetexto · obligatorio · uno de: active, at_rest

The earth pressure the thrust was computed with: active (the wall moves away from the soil) or at rest; AASHTO factors them 1.50 and 1.35 at their maximum.

earth_surchargegrupo · opcional

Optional: what a permanent surcharge on the soil adds, on the footing or as the thrust it brings (AASHTO's ES, γp 1.50 or 0.75, Table 3.4.1-2).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

livegrupo · opcional

Optional: the part that comes and goes (occupancy, traffic, storage; AASHTO's LL with its IM), and the weight of a live surcharge on the soil over the footing, as over an abutment's heel: a code takes it in or out, whichever governs, so it bears in the bearing and is left out where it would hold the footing against sliding or the eccentricity (AASHTO C11.5.6, Fig. C11.5.6-3). Free mode adds it to the dead part; a code with load factors factors each its own way.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

live_surchargegrupo · opcional

Optional: the thrust of a live surcharge on the soil behind the structure, traffic's (AASHTO's LS, 1.75, Table 3.4.1-1), in or out apart from the live part: its horizontal force, its moment and, where the thrust is inclined, its own vertical component, which holds the footing as the thrust's (C11.5.6: one load factor on both). The surcharge's weight on the soil over the footing isn't its thrust: it goes in the live part, which Table 3.4.1-1 factors as it factors LS.

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

friction_loadgrupo · opcional

Optional: the friction a bearing or the superstructure passes to the structure (AASHTO's FR, 1.00, Table 3.4.1-1).

verticalnúmero · opcional · ≥ 0 · por defecto 0

Vertical load that reaches the soil at the base (kN/m).

horizontalnúmero · opcional · por defecto 0

Horizontal load in the direction of the width (kN/m).

moment_widthnúmero · opcional · por defecto 0

Moment that moves the load off centre along the width (kN·m/m); positive moves it towards x = B.

time_since_loadingnúmero · opcional · > 0

Optional: the years since the load began, at which the settlement is wanted: how far the clay's consolidation has gone (with its cv) and the sand's creep (Schmertmann's C2). Empty, the final consolidation and no creep (C2 = 1, as Leonards and Holtz advise for clean sands). The settlement check takes the final one.

methodsgrupo · opcional

Methods (advanced): each the designer's choice, with its default.

bearing_capacitytexto · opcional · uno de: meyerhof_general, aashto_nominal

The nominal bearing resistance's equation; null, the design code's: meyerhof_general in free mode, aashto_nominal under AASHTO. meyerhof_general: Meyerhof's general bearing capacity equation (1963), with De Beer's shape, Hansen's depth and Meyerhof's inclination factors, and the water table in q and in γ within B below the base (Das & Sivakugan, Eq. 6.28), the textbooks' equation, for a designer who works by it or checks against a book's example. aashto_nominal: AASHTO LRFD's Eq. 10.6.3.1.2a-1 (Munfakh et al. 2001), with Vesic's inclination factors, Cwq and Cwγ for the water, and dq at most 1.4, only where the soil above the base stays (embedment_permanent) and none of it is weaker, for a designer who follows AASHTO's own formulation. AASHTO admits either: its nominal resistance is by "accepted soil mechanics theories" (10.6.3.1.2a), with the theoretical method's resistance factor either way. A wall's base and an MSE block take AASHTO's always.

immediate_settlementtexto · opcional · uno de: elastic, schmertmann_settlement · por defecto "elastic"

The immediate settlement (AASHTO 10.6.2.4.2): the elastic one (10.6.2.4.2a), for any soil, with every stratum's elastic properties (without them, no immediate settlement is computed); or Schmertmann's (10.6.2.4.2c), the strain influence method for cohesionless soils, on each stratum's Es (taken as measured in situ, X = 1.0), with its creep by the years since loading.

soilgrupo · obligatorio

stratalista · obligatorio · 1–50 elementos

Top down from the ground surface; the last stratum may leave its thickness out (it extends down); given, the profile ends at its bottom, over a rigid layer the settlement stops at. A rock below the footing's soil ends the profile: the bearing resistance doesn't count it (the conservative side), and the settlement stops at it.

Cada elemento es uno de:

drainedA sand, or a clay in the long term: its effective strength.

thicknessnúmero · opcional · > 0 · ≤ 1000

Thickness (m), at most 1000 (app.application.bounds).

V = 14 000 kNDrag to move where these strata meet6,00 m

unit_weightnúmero · obligatorio · > 0

Unit weight γ (kN/m³). Without a measurement, AASHTO's traditional values (Table 3.5.1-1): a compacted sand, silt or clay 18.9; a loose sand, silt or gravel 15.7; a soft clay 15.7; a rolled gravel 22.0.

saturated_unit_weightnúmero · opcional · > 0

Saturated unit weight γsat (kN/m³), at least γ and more than water's 9.81. Required where the stratum reaches below the water table.

soil_typetexto · obligatorio · uno de: gravel, sand, silty_sand, clayey_sand, silt, clay, rockfill

What the soil is: gravel, sand (clean, fine to coarse, or slightly silty), silty sand, clayey sand, silt or clay; or a quarried rock fill. Each method reads it to know whether it's for this soil (a sand's methods, a clay's), and nothing is assumed without it. A drained stratum may be any type (a clay in the long term, by c' and φ'); an undrained one is a clay or a silt.

preconsolidation_pressurenúmero · opcional · > 0

Optional: preconsolidation pressure σ'c (kPa), the stratum's stress history: its consolidation takes it, and a clay's OCR for a pile's shaft. Empty, normally consolidated.

behaviortexto · obligatorio · = "drained"

cohesionnúmero · opcional · ≥ 0 · por defecto 0

Cohesion c' (kPa).

friction_anglenúmero · obligatorio · > 0 · < 90

Friction angle φ' (deg).

stiffnessgrupo · opcional

Optional: with the stiffness of every stratum the elastic settlement is computed too.

soil_modulusnúmero · obligatorio · > 0

The soil's elastic modulus Es (kPa), taken as measured in situ (AASHTO 10.4.6.3: a pressuremeter's, where the deformation is critical).

poisson_rationúmero · obligatorio · ≥ 0 · ≤ 0,5

Poisson's ratio μs.

consolidationgrupo · opcional

Optional, for a silt or a clay: with these, the stratum's consolidation settlement is computed and added to the settlement (AASHTO 10.6.2.4.3).

compression_indexnúmero · obligatorio · > 0

Compression index Cc, from one-dimensional consolidation tests (AASHTO 10.4.6.3).

swelling_indexnúmero · opcional · > 0

Swelling index Cs. Required with a preconsolidation pressure above the stratum's σ'o.

initial_void_rationúmero · obligatorio · > 0

Initial void ratio eo, at the stratum's initial vertical effective stress (AASHTO 10.6.2.4.3), from the consolidation test.

coefficient_of_consolidationnúmero · opcional · > 0

Optional: coefficient of consolidation cv (m²/year), for how long the stratum takes; from 1 for a low permeability clay to 100 for an overconsolidated sandy one (Das & Sivakugan, section 2.16). It drains through the faces it shares with a drained soil or the ground surface.

rockRock below the footing's soil (or a wall's): where the soil's settlement stops and the bearing resistance doesn't count it (AASHTO's equations take the soil, the conservative side). A base resting on the rock isn't calculated: it goes on the soil above.

thicknessnúmero · opcional · > 0 · ≤ 1000

Thickness (m), at most 1000 (app.application.bounds).

behaviortexto · obligatorio · = "rock"

undrainedA clay in the short term: its undrained strength, φ = 0.

thicknessnúmero · opcional · > 0 · ≤ 1000

Thickness (m), at most 1000 (app.application.bounds).

V = 370 kNDrag to move where these strata meetDrag to move where these strata meet3,00 m

unit_weightnúmero · obligatorio · > 0

Unit weight γ (kN/m³). Without a measurement, AASHTO's traditional values (Table 3.5.1-1): a compacted sand, silt or clay 18.9; a loose sand, silt or gravel 15.7; a soft clay 15.7; a rolled gravel 22.0.

saturated_unit_weightnúmero · opcional · > 0

Saturated unit weight γsat (kN/m³), at least γ and more than water's 9.81. Required where the stratum reaches below the water table.

soil_typetexto · obligatorio · uno de: clay, silt

What the soil is: a clay or a silt, the soils taken undrained in the short term (a granular soil is always drained, Das & Sivakugan, section 2.22: make the stratum drained).

preconsolidation_pressurenúmero · opcional · > 0

Optional: preconsolidation pressure σ'c (kPa), the stratum's stress history: its consolidation takes it, and a clay's OCR for a pile's shaft. Empty, normally consolidated.

behaviortexto · obligatorio · = "undrained"

undrained_shear_strengthnúmero · opcional · > 0

Undrained shear strength cu (kPa). Required where the footing's bearing capacity reaches the stratum.

drained_strengthgrupo · opcional

Optional: the clay's effective strength c' and φ', where it could soften and lose strength with time (a stiff fissured or overconsolidated clay, a compacted cohesive fill): its bearing is checked drained as well, under the permanent loads only, and the lower governs (AASHTO 10.6.3.1.2a, C10.6.3.1.1). Empty, the short-term undrained check alone.

cohesionnúmero · opcional · ≥ 0 · por defecto 0

Cohesion c' (kPa).

friction_anglenúmero · obligatorio · > 0 · < 90

Friction angle φ' (deg) of the clay in the long term.

stiffnessgrupo · opcional

Optional: with the stiffness of every stratum the elastic settlement is computed too.

soil_modulusnúmero · obligatorio · > 0

The soil's elastic modulus Es (kPa), taken as measured in situ (AASHTO 10.4.6.3: a pressuremeter's, where the deformation is critical).

poisson_rationúmero · obligatorio · ≥ 0 · ≤ 0,5

Poisson's ratio μs.

consolidationgrupo · opcional

Optional, for a silt or a clay: with these, the stratum's consolidation settlement is computed and added to the settlement (AASHTO 10.6.2.4.3).

compression_indexnúmero · obligatorio · > 0

Compression index Cc, from one-dimensional consolidation tests (AASHTO 10.4.6.3).

swelling_indexnúmero · opcional · > 0

Swelling index Cs. Required with a preconsolidation pressure above the stratum's σ'o.

initial_void_rationúmero · obligatorio · > 0

Initial void ratio eo, at the stratum's initial vertical effective stress (AASHTO 10.6.2.4.3), from the consolidation test.

coefficient_of_consolidationnúmero · opcional · > 0

Optional: coefficient of consolidation cv (m²/year), for how long the stratum takes; from 1 for a low permeability clay to 100 for an overconsolidated sandy one (Das & Sivakugan, section 2.16). It drains through the faces it shares with a drained soil or the ground surface.

water_tablegrupo · opcional

null when there is none.

depthnúmero · obligatorio

Depth below the ground surface on its side (m); negative when the water stands above it.

V = 1050 kNDrag to move the water table0,80 m below the ground

designgrupo · opcional

The mode its checks are judged in, free or a design code, and the designer's limits. Empty, free mode.

codetexto · opcional · uno de: free_mode, aashto_lrfd_10 · por defecto "free_mode"

The mode the checks are judged in. free_mode: no design code; the methods are the designer's (each left by the data, or chosen), each check gives its unfactored factor of safety or its quantity, and only the checks the designer set a limit for (limits) have a verdict; the limits the codes and manuals ask come beside each check as references. aashto_lrfd_10: AASHTO LRFD Bridge Design Specifications, 10th edition (2024), load and resistance factor design, each check φRn/ΣγQ ≥ 1, with the methods the code admits.

limitsnúmero · opcional

Optional: the designer's limits, by the check's id (its factor of safety, or its settlement, deflection or eccentricity in m). In free mode, the only checks with a verdict; under a code, in place of the code's, and the answer says what the code asks.

resistance_factorsnúmero · opcional

Optional, with a code of load and resistance factors: the resistance factors φ the designer edited, by the check's id, in place of the code's.

load_modifiergrupo · opcional

With a code of load and resistance factors: the load modifier η = ηD ηR ηI on the strength limit state's factors (AASHTO 1.3.2.1 to 1.3.5), 1.00 each by default.

ductilitynúmero · opcional · ≥ 0,95 · por defecto 1

ηD (AASHTO 1.3.3): 1.00 for conventional designs and details; 1.05 or more for nonductile components and connections; 0.95 or more where ductility-enhancing measures beyond the code's are specified.

redundancynúmero · opcional · ≥ 0,95 · por defecto 1

ηR (AASHTO 1.3.4): 1.00 for conventional redundancy, and always for a footing or a pile, whose φ already accounts for it (10.5; another value is refused there, and a pile's φ for few elements under its support is redundancy_factor's); 1.05 or more for nonredundant members; 0.95 or more for exceptional redundancy.

importancenúmero · opcional · ≥ 0,95 · por defecto 1

ηI (AASHTO 1.3.5): 1.00 for typical bridges; 1.05 or more for critical or essential bridges; 0.95 or more for relatively less important ones, as the Owner classifies them.

Escribe para buscar: un método, una advertencia, un campo…

↑↓ para moverte · ↵ para abrir · esc para cerrar